
Commercial Cooking Equipment Installation
ANY BRAND | GAS OR ELECTRIC | OLD EQUIPMENT REMOVED
Commercial cooking equipment is heavier than anything in a home kitchen, runs on bigger gas loads or three-phase power, and has to go in around trading hours. A badly connected fryer or range is a gas safety problem from the first service.
National Appliance Repairs installs commercial ovens, combi ovens, ranges, cooktops, griddles, char grills, salamanders, fryers and bain maries of any brand across Melbourne, Sydney, Brisbane, Adelaide and Perth. We work in restaurants, cafes, childcare centres, schools and aged care kitchens. Every price includes certified technicians, removal of your old equipment, and the packaging taken away.
Any brand, gas or electric
One set price for each type of equipment.
Ready for service
Positioned, connected and tested before handover.
Old equipment removed
Taken to a metal recycler, with the packaging taken away.
What's Included
Every commercial cooking equipment installation price covers:
- Positioning the new equipment in the existing position
- Connecting it to the existing gas, electrical or water connection
- Testing burners, elements, thermostats and controls
- Removing your old equipment to a metal recycler
- Taking the packaging away

Commercial Cooking Equipment Installation Prices
| Equipment | Technicians | Price (inc GST) |
|---|---|---|
| Convection oven, single | 1 | $300 |
| Convection oven, double stacked | 1 | $550 |
| Combi steamer oven, bench or floor | 1 | $550 |
| Freestanding oven, electric | 1 | $385 |
| Freestanding oven, gas, up to 900 mm | 1 | $485 |
| Cooktop or hob, electric or induction | 1 | $385 |
| Cooktop or hob, gas | 1 | $450 |
| Griddle or hot plate | 1 | $385 |
| Char grill, gas | 1 | $385 |
| Salamander or overhead grill | 1 | $385 |
| Deep fryer, single pan | 1 | $450 |
| Deep fryer, double pan | 2 (included) | $630 |
| Bain marie | 1 | $290 |
| Commercial microwave, bench mounted | 1 | $240 |
| Food warmer or holding cabinet | 1 | $300 |
| Vacuum sealer, bench mounted | 1 | $250 |
All prices include GST. Each price covers a like-for-like swap in the existing position and connections, with no modifications and easy, ground-floor access. Heavy units, such as double stacked ovens, floor combis and high-mounted salamanders, may need a second technician, decided on site with the reason explained.
Extras
Quoted and signed off before any work starts:
- Second technician: $297 flat, where the job needs two people
- Gas certificate of compliance: quoted separately, issued by our licensed plumber
- Electrical certificate of compliance: quoted per job, issued by our licensed electrician
- Electrical upgrade, single or three phase: quoted per job, carried out by a licensed electrician
- Gas upgrade: quoted per job, carried out by a licensed plumber
- Plumbing or waste upgrade for combi ovens and wet bain maries: quoted per job
- Benchtop modification or wall mounting: quoted per job
- Site induction: charged on the time it takes
- Lift or loading dock booking: $99
- Stairs: $99 per flight, each way
- Long carry, crane or hoist, or a restricted delivery window: quoted per job
- Weekends and public holidays: twice the standard price
Gas Hoses, Restraints and Castors
Commercial catering equipment in Australia is installed to AS/NZS 5601.1. Energy Safe Victoria's guidance on connecting commercial catering equipment sets out what that means for equipment that moves for cleaning:
- The hose assembly is certified to AS/NZS 1869, no longer than 3 metres, and never joined to another hose
- It hangs freely in a U shape, with the bottom at least 50 mm above the floor
- A chain or wire restraint is fixed to the appliance and the wall, no longer than 80% of the hose length
- The hose itself is never used as the restraint
- Castors are the manufacturer's own, and they can't be disabled to avoid fitting a hose
Why it matters:
- An unrestrained fryer pulled out for cleaning puts the full strain on its gas hose
- Equipment that isn't designed to move is connected with rigid pipe, so the method depends on the appliance

Connections
Gas, Power and Water
Gas isolation
Energy Safe Victoria's commercial kitchen guide to AS/NZS 5601.1:2022 says the manual shut-off valve must be accessible at all times. Where more than one commercial catering appliance is connected, the kitchen also needs a quarter-turn isolation valve or an emergency stop button with a solenoid, with signage showing where it is.
Three-phase power
Many commercial ovens, combis and fryers run on three-phase power. Adding three phase or a dedicated circuit is an electrical upgrade by a licensed electrician.
Water and drainage
Combi steamer ovens and wet bain maries need water and a drain. Missing plumbing is quoted before we start.
Clearances Around Hot Equipment
Every appliance must meet its manufacturer's clearances from combustible surfaces. Energy Safe Victoria's sheet on high energy appliances requires a minimum 50 mm clearance for equipment such as brat pans, target tops and noodle cookers when it has no thermostat, runs for long periods, or flues near a combustible wall.
New equipment that's wider than the old should still sit fully under the exhaust canopy. We check this on site.
Common Faults
Installation Mistakes We Fix
No restraint chain. The gas hose takes the strain every time the unit moves
Hose lying on the floor. It gets crushed, kinked and covered in grease
Castors removed to avoid fitting a hose. This can void the appliance's certification
Fryer pushed hard against a wall. No clearance from combustible surfaces
Isolation valve buried behind equipment. Nobody can reach it in an emergency

Repair Before You Replace
Thermostats, thermocouples, gas valves, elements and fans are repairs. Our commercial oven repairs, combi oven repairs, commercial fryer repairs, grill and griddle repairs and bain marie repairs can look at faulty equipment first, including Blue Seal, Waldorf, Goldstein and Rational equipment.
Worth checking first:
- A pilot that won't stay lit often points to a thermocouple, not a failed appliance
- An oven that runs hot or cold may only need its thermostat tested
- Our commercial appliance repairs cover the rest of the kitchen

Client Testimonials
Thousands of Australian families trust National Appliance Repairs. Here's why.
Restaurants, cafes and institutional kitchens across five capitals trust us with their equipment.
FAQS
Commercial Cooking Equipment Installation Questions
How much does commercial cooking equipment installation cost?
From $240 inc GST for a bench-mounted commercial microwave to $630 for a double pan deep fryer with two technicians. A gas freestanding oven up to 900 mm is $485.
Is the gas certificate of compliance included?
No. Commercial gas compliance differs from domestic, so it's quoted separately. Our licensed plumber checks the installation and issues the certificate.
Can you install outside trading hours?
Yes. Weekend and public holiday work is twice the standard price, and a restricted delivery window is quoted per job.
Do you install any brand?
Yes. We install commercial cooking equipment from any brand, including Blue Seal, Waldorf, Goldstein and Rational.
What if the new equipment needs three-phase power?
That's an electrical upgrade, carried out by a licensed electrician and quoted per job before any work starts.
Installations Process
Commercial Cooking Equipment Installation
-
1
Book your installation
Call 1300 434 380. Tell us the equipment, the model, what it's replacing, and your trading hours.
-
2
Check the site
We confirm access, the gas, power and water connections, clearances, and any site induction.
-
3
Agree the price
You get the price upfront, plus any extras, signed off before we start.
-
4
Install and connect
The equipment is positioned, connected and restrained where it moves.
-
5
Test, hand over and remove the old one
We test every burner, element and control, walk your team through it, and take the old equipment and packaging away.
Contact us
Book Your Commercial Cooking Equipment Installation
Tell us the equipment, the model and whether it's gas or electric.
Call us: 1300 434 380
- Any brand
- Certified technicians included
- Old equipment removed
Call Us: 1300 434 380
or leave a message using the form below
