Skip to main content
Fully integrated dishwasher with a timber cabinet door panel, open in a kitchen

Integrated Dishwasher Installation

Levelled | Panel Fitted | Water, Drain and Power Connected Properly

An integrated dishwasher disappears into your kitchen. That is the point of it, and it is also why installation matters more than on any freestanding machine. It has to fit the cavity exactly, sit perfectly level, carry a cabinet door on its own door, and connect to water, drainage and power through the cabinet beside it.

Get any of that wrong and the dishwasher leaks, will not drain, or will not close cleanly. National Appliance Repairs installs integrated dishwashers across Melbourne, Sydney, Brisbane, Adelaide and Perth as part of our appliance installation service.

Two Styles

Fully Integrated or Semi-Integrated

Both need the same care in fitting. The difference is how much of the door panel has to line up with the cabinetry around it.

  • Fully integrated

    Completely hidden. The controls sit on the top edge of the door, visible only when it is open, and a cabinet panel covers the entire front.

  • Semi-integrated

    Shows the control panel across the top of the door, with the cabinet panel fitted below it.

What’s Included

Every integrated dishwasher installation covers the same ground, whether it is replacing a machine or going into a new cavity.

What’s included:

  • Checking the cavity dimensions against the dishwasher’s specifications
  • Levelling the machine on its adjustable feet
  • Fitting the cabinet door panel supplied with your cabinetry, and adjusting the door balance to its weight
  • Fitting the steam protection strip under the benchtop, where the model supplies one
  • Connecting the water supply, the drain and the power
  • Confirming the sink waste connection is open before the first cycle
  • A test cycle, checking for leaks and a clean drain
  • Removing your old dishwasher
Fully integrated Miele dishwasher with the controls on the top edge of the door, behind a matching cabinet panel

The Three Connections

Connection Where it goes Who connects it
Water supply To an isolation tap in the cabinet beside the dishwasher Existing tap: connected at installation. New tap or supply line: licensed plumber
Drain Into the sink waste, with the hose looped high under the benchtop Existing waste connection: connected at installation. New waste connection: licensed plumber
Power A power point in the cabinet beside the dishwasher, not behind it Existing power point: plugged in. New power point: licensed electrician

The power point, water tap and waste connection belong in the adjacent cabinet, with the hoses and cable passing through an opening in the cabinet side. A power point hidden behind the dishwasher cannot be reached to isolate the machine without pulling it out.

If your kitchen has never had a dishwasher:

  • The water, drain and power connections do not exist yet
  • Installing them is licensed plumbing and electrical work

Why Level Matters So Much

An integrated dishwasher that sits even slightly out of level does not seal properly at the door. Water finds its way past the seal during the wash, runs down into the base tray, and trips the flood protection float. The machine then shuts itself down with a flood code, and a brand-new dishwasher appears faulty.

Levelling also decides whether the door panel lines up with the drawers and doors around it. A panel that sits proud or crooked catches on neighbouring cabinetry every time the door opens.

The door panel and door balance:

  • The cabinet panel adds weight to the door, and different panels weigh different amounts
  • Set too light the door drops open; set too heavy it springs shut — both wear the hinges
Integrated dishwasher with a white cabinet door panel, open in a kitchen

Installation Mistakes We Fix

These are faults we are called out to repair that started at installation.

  • The dishwasher was never able to drain

    On new builds and renovations, the knockout inside the sink waste spigot sometimes never gets punched through. The dishwasher cannot drain from its first cycle.

  • No high loop in the drain hose

    Without it, dirty water can siphon back into the dishwasher.

  • Out of level

    Door seal leaks and flood protection shutdowns.

  • Kinked hoses

    Pushed back into the cavity carelessly, the inlet or drain hose folds and restricts flow.

  • Power point behind the machine

    No way to isolate it in an emergency.

  • Steam strip missing

    Hot steam from the opening door damages the underside of timber and laminate benchtops over time.

Integrated dishwasher in a white kitchen being checked by a homeowner on the phone

Replacing a Freestanding Dishwasher With an Integrated One

This usually involves more than the dishwasher. Your cabinetry needs a door panel made to suit the model, and the cavity has to match its dimensions.

We install integrated dishwashers from the major brands in Australian kitchens, including Bosch, Miele, Smeg and Fisher & Paykel, following each manufacturer’s installation instructions.

The order to do it in:

  • Speak to your cabinetmaker about the door panel first
  • Then send us the dishwasher model number so we can check the space
Aeg freestanding dishwasher

Installations Process

Rangehood, Oven and Gas Cooktop Installation

  1. 1

    Book your installation

    Call 1300 434 380 or enquire online. Our live team answers in about 30 seconds. Tell us what you are installing, the model number if you have it, and what it is replacing.

  2. 2

    Check the site

    Before anything is fitted, we check what the new appliance needs against what is already there: the cabinet cut-out, clearances, the electrical supply, the gas type and connection, and the water and drainage. Most installation problems are decided at this step.

  3. 3

    Agree the price

    You get a clear quote covering the installation and anything the site needs to accept the new appliance. Nothing proceeds without your approval.

  4. 4

    Install and connect

    The appliance is fitted and levelled to the manufacturer’s specifications. Gas and hardwired electrical connections are made by appropriately licensed trades and certified.

  5. 5

    Test, hand over and remove the old one

    We test the appliance, walk you through it, hand over your compliance documentation, and take the old appliance away.

Client Testimonials

Thousands of Australian families trust National Appliance Repairs. Here's why.

Households and property managers across five capitals trust National Appliance Repairs with their kitchens. Here is what they say.

Regina Thumm
2 days ago
Had the technician come over and fix my western house I win and put in a new temperature gauge. He was very friendly helpful. Will recommend this technician to anyone else
Michelle W
3 days ago
Mick was great, very professional and got the job (oven repair) done quickly. He was also very polite and I appreciated his explanation on what the problem was and how he fixed it. Highly recommend!
Christine Le
3 days ago
Loved our technician
Matt Hammett
4 days ago
Good experience, friendly team, thanks team 👍🏼
Ian Bullimore
5 days ago
Very professional, responsive and polite. G Kept me upto date at each stage Service was great
Anup was very friendly and professional. He even looked at another appliance for us while he was here to fix our dishwasher. Nhe went above and beyond expectations
The professional service provided to resolve the issues with the kitchen Rangehood was truly outstanding. Everything was handled with great care and expertise to ensure the equipment operates perfectly. Benjie and Ashwin was remarkable and efficient in identifying the issue and repairing. It is a pleasure to recommend such reliable and high-quality work to anyone in need of similar assistance.
Vagai Toloa
1 week ago
very good service
Photo from customer review
Dan was professional and did a good job.
Joe Lubman
2 weeks ago
Benji was fantastic! He helped us identify the problem and gave us confidence through his thorough testing and clear explanations. Thanks so much for your help, Benji!
Photo from customer review
C cooper
2 weeks ago
Very knowledgeable and fantastic work, will use again
Matt Hammett
2 weeks ago
Great experience, Mick was very knowledgable and helpful
Bill Hanscombe
2 weeks ago
Good job done by Jimmy and Bengie.
Andrew Thexton
2 weeks ago
Very professional!
Photo from customer review
Vanessa Harm
2 weeks ago
The technician who inspected my leaking washing machine was extremely helpful and found the issue quickly. Was a pleasure to deal with him.
Radek
2 weeks ago
Appliance repair service as expected.
Mary Drossos
2 weeks ago
Alex was great, at picking up our coffee machine and delivering it to us in perfect condition. He was on time, professional and didn’t leave until we were satisfied that our machine was in order. Would highly recommend Alex and Nationwide appliance repairs.
Photo from customer review
Dan was very helpful, efficient and friendly. Thank you!
Photo from customer review
Kristen Ripper
2 weeks ago
Office staff were very efficient with bookings.
Photo from customer review
David Hughes
2 weeks ago
quick and efficient
Ashley Patterson
2 weeks ago
Comprehensive service and price matching
Liv Coral
3 weeks ago
Fixed machine, competitive price, friendly service, Anup did a good job.
Caleb Scotson
3 weeks ago
Fantastic service from Benjie and Ashwin
Photo from customer review
David Strangward
3 weeks ago
Excellent service turned up on time, efficient work, polite and tidy job
Marija Mudri
3 weeks ago
Josh was great. Quick easy fix.

FAQS

Integrated Dishwasher Installation Questions

Do I need a plumber to install an integrated dishwasher?

If your kitchen already has a dishwasher isolation tap and waste connection, those are connected during installation. If they do not exist, installing them is licensed plumbing work.

Where should the power point for a dishwasher be?

In the cabinet beside the dishwasher, not behind it, so the machine can be switched off and unplugged without pulling it out.

Why is my new integrated dishwasher leaking from the door?

Most often it is not level, so the door does not seal. It can also be a door panel that is too heavy for the door balance setting. Both are installation issues, not faults with the machine.

Can you fit the door panel from my cabinetmaker?

Yes. We fit the cabinet door panel supplied with your cabinetry and adjust the door balance to suit its weight.

Do you take the old dishwasher away?

Yes. We remove your old dishwasher when we install the new one.

Contact us

Book Your Dishwasher Installation

Tell us the dishwasher model, whether it is replacing an existing machine, and whether the door panel is ready.

Call us: 1300 434 380

  • Old Dishwasher Removed *subject to availability
  • Levelled, panelled and tested
  • Servicing Australia since 2009

Call Us: 1300 434 380

or leave a message using the form below

    Call Us: 1300 434 380

    or leave a message using the form below

      1300 434 380